Coal Based Granular Activated Carbon

The coal based granular activated carbons, according to different production processes, can be divided into fractured and extruded granular activated carbon. They are characterized by wide size range, strong adsorption power and high mechanical strength etc, and are extensively used in recovery and purification of various gas-phase, catalyst carrier, solvent recovery, purification of water, etc.
Specifications
Unit
0.9
1.5
3.0
4.0
7.0
4*8mesh,8&*30mesh,
10*35mesh,12*40mesh
Iodine adsorption value
mg/g
850/1050
850/1050
750/1050
800/1050
800/1000
800/1050
Carbon tetrachloride adsorption rate
%
50/70
50/70
50/70
50/70
50/70
50/70
Moisture
%
5 max
5 max
5 max
5 max
5 max
5 max
Ash
%
8/15
8/15
8/15
8/15
8/15
8/15
Abrasive resistance
%
90 min
90 min
90 min
90 min
90 min
90 min
Bulk density
g/l
450/550
450/550
450/550
450/550
450/550
450/550
Particle diameter
mm
0.9
1.5
3.0
4.0
7.0
/

* Usual size:4*8mesh,8*30mesh, 10*35mesh and 12*40mesh etc. or meet special requirement of customers.

  • Analysis methods:Analysis methods: according to GB/T7702-1997 stipulations. For external standard, refer to ASTM STANDARD FOR ACTIVATED CARBON & AWWA STANDARD FOR ACTIVATED CARBON.
  • Packing:net wt 25kgs each, put in woven bag with plastic film and Kraft paper bag inside, or net wt 500kgs in woven-plastic fixed bag, or meet special requirement of customers.

Copyright(C)2002, Shanghai Activated Carbon Co., Ltd All Rights Reserved.
Supported by ChemNet ChinaChemNet Toocle